Clamp Cell for Low Temperature Applications 
Part of the CryoDAC series


The Diacell® CryoDAC-ST was originally designed for micro-Raman work in the continuous flow cryostat, Janis ST-500.  However, this cell can also be used for other micro-spectroscopy techniques, such as imaging and high resolution photoluminescence under high pressure.  Provisions have also been made to enable electrical work.

The Diacell® cryoDAC-ST has been engineered to fit seamlessly onto the sample mount of the Janis ST-500.  For more information about this specific microscopy cryostat, please refer to Janis' webpage.

You can see the cell mounted in the cryostat and microscope here.

Technical Specifications

Cell Material	High Strength Beryllium Copper
Anvil Support Plate	Beryllium Copper
Pressure Mechanism	Screw Drive
Maximum Pressure	20 GPa
Temperature Range	To Ultra-Low Temperatures
Top Angle	52° along vertical axis
Bottom Angle	17° along vertical axis
Lateral Access	N/A
Heating	N/A
Cooling	In a cryostat
DAC Diameter	25/32 mm approx.
DAC Height	37 mm approx.
Working Distance to Sample	8.5 mm
Numerical Aperture	0.68
Interfacing Solution	Janis' sample mount

Maximum pressure is dependent upon the culet size of the anvils.
easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of easyLab Technologies Ltd.

Parameters

Experimental Techniques	far-IR | Fluorescence | FTIR | Infrared | Microscopy | Raman |
Maximum Pressure	1 GPa | 10 GPa | 3.0 GPa | 30 GPa |
Temperature Range	Low Temperatures | Room Temperature | Ultra-Low Temperatures |